Click image to view full size image
Specifications of traveling eot bridge crane 5tons
1.Lifting capacity: 0.25~30t
2.Span: 5~31.5m (Can be designed and fabricated according to your requirements)
3.Lifting Height: No limited (Can be designed according to your real requirement)
4.Working Duty: A3~A5 according to the use frequency
5.Power Source: 3ph, 380V, 50HZ or under customer requirement.
6.Working Temperature: -25~+40°C
Introductions traveling eot cranes 5tons
1.The whole set is used with electric hoist, a kind of light type crane equipment
2.It consists of four components: the girder, end carriage, electric hoist and electric control equipment3.The Girder adopts the welding structure of U-shaped groove and structure with the I-steel.
4.It is operated by ways of ground control, wireless remote control and cabin control.
Technical data of bridge crane 5ton cranes
| lifting capacity(t) | 16 | |||
| span(m) | 7.5-31.5 | |||
| lifting height(m) | 12-30 | |||
| operational method | ground controlling | |||
| crane traveling mechanism | working speed | 20 | ||
| speed ratio | 58.78 | |||
| motor | type | ZDY22-4/1.5*2 | ||
| rotation speed | 1380r/min | |||
| electric hoist traveling mechanism | electric hoist type | MD | ||
| lifting speed | 3.5 3.5/0.35 | |||
| travelling speed | 20 30 | |||
| motor | cone squirrel cage model | |||
| work duty | A3-A5 | |||
| power source | 3-p 380V 50Hz | |||
| wheel diameter | 370mm | |||
| width of trail | 37-70 | |||
Welded beam of main beam
Pls kindly tell us the following information before sending us the enquiry,so that we can help choose the most suitable material handling for you:
1.Lifting capacity
2.lifting height(from the ground to hoist hook)
3.Span(rail center to rail center)
4.Power supply(to match with the motor)
5.Main usage
6.Other special requests
Industrial use HF single girder traveling eot bridge crane 5tons
